Area Gamma Monitor (Indoor)
Indoor Area Gamma Monitor with LORA-enabled telemetry, 1 μSv/h to 100 mSv/h detection range, OLED display, and 40-hour battery life.
Learn moreIndoor + outdoor coverage with alarm-ready outputs
A radiation safety team needed continuous coverage across controlled indoor zones and outdoor perimeter points. Pairing indoor and outdoor Area Gamma Monitors gave them real-time visibility, alarm-ready I/O, and a clean integration path into the existing control room.
Radiation safety teams often run on manual surveys and periodic checks. For controlled areas, that leaves blind spots between measurements and slows the response to unusual dose-rate changes.
They needed:
Indoor Area Gamma Monitors were placed in controlled lab areas with local OLED indication and battery backup. Solar-powered outdoor units (IP65) handled perimeter coverage. Both units exposed the same set of interfaces — relay contacts, 4–20 mA, RS-485 Modbus RTU, and Ethernet Modbus TCP/IP — so the safety team could pull readings into whatever control system they already used.
Continuous coverage instead of spot-check only
Same monitoring story indoors and outdoors
Plug-in ready for existing control rooms
Better operator and safety-officer visibility
Alarm-ready I/O for faster response
Open any product for full specs, photos, and downloads.
Indoor Area Gamma Monitor with LORA-enabled telemetry, 1 μSv/h to 100 mSv/h detection range, OLED display, and 40-hour battery life.
Learn moreOutdoor area gamma monitor is a compact high efficient solar powered device which can measure radiation level and report it through LoRA communication.
Learn moreIndoor Area Gamma Monitor with Alarm System, LoRA communication, 1 μSv/h to 100 mSv/h detection range, large RGB display.
Learn moreTell us what you're trying to measure, where it'll be used, and your timeline. Our engineers will scope it with you.
Get in touch